Application: Industrial Control/Protocol Converter/Networked Broadcast/Building Security and Monitoring
| Name | Configuration |
|---|---|
| Core Board Model | MD6UX_CORE_V20 |
| Processor Manufacturer | NXP |
| Main Control Chip | MCIMX6G2CVM05AB |
| CPU | A7 (528MHz) |
| Size | 65mmx45mm |
| Supported Systems | LINUX+FreeRTOS |
| Application Field | Industrial Control/Protocol Converter/Networked Broadcast/Building Security and Monitoring |
| NPU | None |
| Memory RAM | 512MB |
| Emmc Storage | 8GB High-Speed EMMC |
| Wireless Network | 2.4G+5.8G Dual-band WiFi High-speed SDIO Interface |
| Wired Network | Dual On-board Built-in Hundred Megabit MAC |
| LVDS/RGB | 24-bit RGB 720P@60Hz |
| MiPiTX | None |
| MiPiRX | 8-bit parallel YUV/RGB |
| PCI-E | None |
| USB | Two USB 2.0 ports (one is OTG) |
| Operating Temperature | Industrial grade -40 to 85 degrees |
| CAN/FD | Dual CAN Bus |
| Gigabit Ethernet | Dual RMII Ethernet Interface |
| I2S/SPI | 4 SPI channels |
| I2C/I3C | 4 I2C channels |
| UART | 8 UART ports |
| GPIO | Up to 76 multiplexed GPIO |
| ADC | 2 analog ADC input interfaces |
| Connector | 1.27MM Female Pin Header |